One of the most important things that you need to invest in if you have a garden is an irrigation system. It is the only way that you can look after your garden. Otherwise, you cannot expect to take care of your plants. The fact is that an irrigation system is an absolute must. Your flowers and landscape need it so that they thrive.
No matter where you might be located, an irrigation system allows you to look after your landscape in the best way possible. Besides, the latest irrigation systems use innovative technology to deliver results that will blow your mind away. However, it is crucial that you understand that determining irrigation system costs is not as straightforward as you think.
There are a few things that need to be taken into account to understand how much money you will have to spend on the installation. To help you get an idea about what to expect, we have created the ultimate post just for you. So, what are you waiting for? Let’s dive right in.
One of the most important things that you have to focus on is equipment. Installing the irrigation system would take less time if you have equipment access. This means that if you have access to a trencher, it would be much easier to get the irrigation system installed. On the other hand, you would have to spend more on labor costs if you do not have one. It is also important that you keep in mind that labor would be needed for backfilling and leveling the irrigation trenches. Otherwise, it would not be possible for the pipe and heads to be installed.
Moreover, it is important that you keep in mind that most new homes tend to be close to property boundaries. In such a situation, only one gate would be able to access the house. Besides, the side of the property might already have an air conditioning unit or door installed. This would make it difficult for the lawn mower to make its way inside. Hence, more effort would be required.
The next thing that would influence irrigation system cost is the presence of rocks. If the irrigation system has to be weaved in and out of the rocks, you must be prepared to spend more money. Besides, there would be a need for additional excavation. In case there is no path, rock hammering might be needed. The fact is that dealing with rocks is no easy task. There is a lot that you would have to think about. Hence, the cost would be much higher. However, it is advised that you discuss the costs with the irrigation installation company to find out if it is possible to reduce costs by finding an alternative spot.
If you plan on installing an irrigation system on the hillside, you would have to be prepared for an increase in price. The reason behind this is that you would have to pay for increased modifications and labor. Otherwise, the irrigation company would not be willing to install the irrigation system due to the friction and gravity limitations. You need to understand that working on hillsides is no easy task. It requires a great deal of effort. In fact, you must choose an experienced company so that you do not waste any money. Besides, the results will leave you amazed.
Now, there might be an existing landscape that would have to be removed or modified to make way for the new landscape. Installing an irrigation system for an existing landscape is no easy task. This is why you would have to spend more money.
It is important that avoid installing a new lawn before you have installed an irrigation system. Otherwise, you must be willing to spend more money. You have to understand that the irrigation would need to get surgically installed to protect the already installed landscape. It is the only way that damage can be prevented.
The irrigation system installation company would have to be extremely careful when installing the irrigation system. It would have to be very careful when compacting the trenches, leveling the soil, and setting the heads. This would increase irrigation system costs. If you think that the job would be easy, you need to think again. The fact is that the irrigation installation company would have to go above and beyond to provide the results that you are looking for.
When it comes to water, you might obtain it from surface irrigation water, a private water company, a municipality, or a community well. Each of these options allows a specific amount of water to be used. This is why great care would be required for determining how much water can be used by the irrigation system.
If you use a private water well, you would only be able to yield 5 to 10 gallons of water a minute. On the other hand, you would get 15 to 20 gallons of water a minute if you rely on a private water company. The availability of water would dictate how much water you can use. The more water you can use the better. However, if your water supply is restricted, you would have to rely on the irrigation system installation company to come up with the right solution for you.
Moreover, you should bear in mind that an irrigation pump would also have to be installed if you rely on surface irrigation water that uses an irrigation canal. The irrigation pump would enable you to transfer water from the irrigation pond into the irrigation system.
Some form of backflow prevention is necessary for protecting the irrigation system. Expect to spend around $700 on backflow prevention.
When watering small areas or areas that are oddly shaped, you would require spray zones. The spray zones would have a distance of 4 inches to 15 inches and are able to irrigate odd-shaped areas without any trouble. You would have to rely on them to ensure that undesired areas get enough water. Spray zones are available for approximately $500 to $700 for each zone.
The next piece of equipment that is needed in an irrigation system is rotor zones. The reason why rotor zones are needed is that they are suitable for irrigating large areas, especially those that have more dimensions. They are commonly found on a football field or park. The fact is that rotors work best when the area has more dimension. You will have to spend about $500 to $700 for each zone.
Controllers are also recommended as they provide a variety of features. Some of them make for the perfect automation tool as they manage water supply on their own. In fact, you can even get a controller that is able to sense the weather and make necessary adjustments on its own for better management of water supply to the plants. Therefore, it would be able to reduce damage. You can get a controller for anywhere from $100 to $500.
To determine the controller needed, you would have to consider how many zones would be covered by the irrigation system. Expect to spend more depending on the number of zones that would be covered. Generally, most controllers are able to cover stations, while some can even be expanded to cover more zones. This is why it is recommended that you consider your options.
Lastly, you also require drip zones. Their price depends on your actual needs. If you plan on installing the drip for flower pots or for irrigating an entire landscape, you must understand that the cost is likely to vary considerably. Typically, a drip zone will set you back by $250 to $700 for each zone covered. Setting up drip zones will make your life a whole lot easier.
Now that you know everything there is to know about irrigation system costs, it is important that you hire the best irrigation system installation company to ensure that you benefit from a stress-free experience. This is where Hydro-Tech Irrigation truly shines. We provide an outstanding service that you can truly rely on.
If you want to get your irrigation system up and running, we have got you covered. As we have significant experience in the field, we should be able to provide the results that you are looking for. There is no better option for you. So, what are you waiting for? All you have to do is give us a call. We will take care of everything and guide you every step of the way.